Environmental Science
D. Pringgenies; W. Ari Setyati; F. Feliatra; D. Ariyanto
Abstract
BACKGROUND AND OBJECTIVES: Mangroves are known to contain tannins, flavonoids, and quinones, which have the potential to be antibacterial, effective even against multidrug-resistant bacteria. Mangroves also have antifungal and antiviral properties. Although, mangroves are known for their use as medicinal ...
Read More
BACKGROUND AND OBJECTIVES: Mangroves are known to contain tannins, flavonoids, and quinones, which have the potential to be antibacterial, effective even against multidrug-resistant bacteria. Mangroves also have antifungal and antiviral properties. Although, mangroves are known for their use as medicinal ingredients, information regarding symbiont bacteria’s antibacterial and antifungal potential is still scarce. Therefore, this study aimed to examine symbiont bacteria in the fruit and leaves of Xylocarpus granatum as additional raw materials for anti-acne cosmetic creams and moisturisers.METHODS: Symbiont bacteria were isolated using the pour plate method through Zobell 2216E and incubated for 2 x 24 hours at 27.5 Celcius degree. Afterwards, 13 isolates were successfully isolated and characterised based on their morphology. Further, everal tests were conducted, including the antibacterial test, antifungal test, molecular identification, and gas chromatography-mass spectrometry. The pathogenic bacteria used in the antibacterial test were Staphylococcus aureus, Vibrio harveyi, and Vibrio alginolyticusFINDINGS: The antibacterial test results showed that eight isolates were capable of producing an inhibition zone against S. aureus, seven isolates were positive for antibacterial activity against Vibrio harveyi, and 10 isolates were positive for antibacterial activity against Vibrio alginolyticus. The pathogenic fungi used in the antifungal test were Malassezia furfur and Candida albicans. The antifungal test results demonstrated that six isolates could produce inhibition zones against Malassezia furfur and Candida albicans. Furthermore, molecular identification was carried out on six potential isolates based on the antibacterial and antifungal tests, which were X2.52, X1.65, X1.64, X1.53, X1.54, and X1.63. The molecular identification results revealed the occurrence of four species in the Xylocarpus granatum mangroves, namely, Sinomicrobium oceani, Proteus mirabilis, Pseudomonas khazarica, and Alcaligenes aquatilis.CONCLUSION: The study found that the mangrove symbiont bacteria had antibacterial and antifungal potential. The compound with the highest concentration in six isolates was 9-octadecenoic acid, methyl ester. This type of content has antibacterial potential and is also predicted to have antifungal potential.
Environmental Engineering
O. Phewnil; T. Pattamapitoon; N. Semvimol; W. Wararam; K. Duangmal; A. Intaraksa; K. Chunkao; P. Maskulrath; S. Hanthayung; P. Wichittrakarn
Abstract
BACKGROUND AND OBJECTIVES: Landslide disasters in Thailand between 1970 and 2011 revealed a notable pattern: they primarily originated on mountain slopes, distinguished by a deeper soil profile. This soil profile comprised clay loam and sandy loam textures and was situated over aged geological formations ...
Read More
BACKGROUND AND OBJECTIVES: Landslide disasters in Thailand between 1970 and 2011 revealed a notable pattern: they primarily originated on mountain slopes, distinguished by a deeper soil profile. This soil profile comprised clay loam and sandy loam textures and was situated over aged geological formations of granite and shale rocks. The affected areas included the southern and northern provinces of Thailand.This study investigated the consequences of landslide hazards on stream water and sediment quality in two watersheds: the Mae Phul–Mae Prong watershed in Uttaradit province, the northern part of Thailand, and the Klong Kram watershed in Surat Thani province, the southern part of Thailand. These watersheds had experienced recurrent landslides, primarily on mountain slopes characterized by deep clayey and sandy loam soils over old granite and shale rock types as well as old granite limestone.METHODS: During wet and dry periods in April and November 2015, 108 samples were collected from 18 stations (9 stations in the Klong Kram watershed and 9 stations in the Mae Phul–Mae Prong watershed). These samples included upland soil, stream water, and sediments. For upland soils, 1 kilogram samples were collected through auger and V-shaped pit techniques using a stainless-steel spade, with composite sampling conducted at 0–30 centimeters across all 18 stations. Stream water was collected in one part using a 1-L polyethylene bottle at 30 centimeter from the stream layer, while other samples were compositely collected in sterilized glass bottles to determine coliforms. Soil and sediment samples were compositely collected from the bottom using a stainless-steel spade. All samples were stored at 4 degrees Celsius and transported to a laboratory for analysis. The insight gained from these collection efforts elucidated the dynamics of landslide impacts at the spatial scale for the two watersheds.FINDINGS: Most water samples met Thai surface water quality standard for various parameters; however, microbial contamination of the water samples attributed to community activities along stream banks was detected. Notably, arsenic was consistently detected in upland soil, stream water, and sediment samples. For Uttaradit, the average arsenic concentrations were 0.22 ± 0.09 milligram per kilogram, 0.01 ± 0.14 milligram per liter, and 9.74 ± 4.42 milligram per kilogram in upland soil, water, and sediment samples, respectively. For Surat Thani, arsenic concentrations were 87.63 ± 208.83 milligram per kilogram, 0.01 ± 0.01 milligram per liter, and 19.44 ± 36.38 milligram per kilogram in upland soil, water, and sediment samples, respectively, particularly near landslide scars where the arsenic concentrations were significantly higher in sediments and upland soils compared with stream water, highlighting the role of landslides near streams. These data suggest that sediment transport from upland soil in the landslide scar into stream water affects water quality, particularly in terms of arsenic concentration near the landslide scar, often surpassing natural standards.CONCLUSION: The study concluded that stream water was directly affected by landslides as these watersheds were unsuitable for consumption due to arsenic and microbial contaminations. This conclusion emphasizes the critical need to incorporate landslide hazard considerations into watershed management practices to safeguard downstream communities and preserve water resources.
Environmental Engineering
V. Babenko; V. Sidorov; Y. Koniaieva; L. Kysliuk
Abstract
This article discusses the prospects for the development of the implementation of scientific and technical cooperation. On the example of international cooperation between Ukraine and Chile, there are approaches to improving the procedure for developing cooperation priorities. The current state of these ...
Read More
This article discusses the prospects for the development of the implementation of scientific and technical cooperation. On the example of international cooperation between Ukraine and Chile, there are approaches to improving the procedure for developing cooperation priorities. The current state of these relations does not reflect real trends in the development of international economic relations in the vector of strengthening the scientific and technical component. Based on the analysis of analytical materials, one of the priority areas of the joint development of scientific and technical issues may be the use of non-traditional renewable energy technologies. Both in Ukraine and in Chile there are objective factors (natural, resource, socio-economic, environmental-technological) for their development. For Ukraine, it is interesting the experience of the scientific and production implementation of these technologies and the organizational and economic support of these priorities in the context of state and regional policy. All these aspects, including through the exchange of intellectual products, will make it possible to increase the effectiveness of support policies, the innovative susceptibility of subjects of production and business activities of Ukraine and the corresponding development of producers and consumers' motivation to non-conventional renewable energy technology.
Environmental Engineering
L. Salvaraji; R. Avoi; M.S. Jeffree; S. Saupin; H.R. Toha; S.B. Shamsudin
Abstract
BACKGROUND AND OBJECTIVE: Air pollution is associated with population growth and economic advancement. Severe cardiovascular complications that require extensive medical service are aggravated by air pollutants. This study illustrates the trend and correlation of cardiovascular disease hospital admission ...
Read More
BACKGROUND AND OBJECTIVE: Air pollution is associated with population growth and economic advancement. Severe cardiovascular complications that require extensive medical service are aggravated by air pollutants. This study illustrates the trend and correlation of cardiovascular disease hospital admission with air pollutants in Sabah for the past 9 years (2010–2019). The additional information obtained from this study will be useful to enhance proper environmental management and reduce air pollution in the cities of Sabah.METHOD: Ecological study design was utilized with cardiovascular disease hospital admission and ambient air pollutants in Sabah retrospective data. Data were collected from four districts with established continuous air quality monitoring stations. Collected data were analysed spatially and statistically. Autoregressive integrated moving average modelling was implemented to forecast the cardiovascular disease hospital admission.FINDING: Kota Kinabalu recorded the highest hospital admissions for cardiovascular disease, followed by Sandakan, Tawau and Keningau. The cardiovascular disease hospital admission prevalence rate in Kota Kinabalu was 12.45 per 1,000 population, followed by Sandakan, Tawau and Keningau (4.54; 4.18; and 5.88 per 1,000 population) in 2019. The cardiovascular hospital admissions increased in Kota Kinabalu, Sandakan and Tawau. The nitrogen dioxide (<0.04 ppm), carbon monoxide (<9 ppm), ozone (<0.05 ppm) and PM10 (<100 µg/m3) gases detected are below the national standard limit levels. In the later years of the series, the ozone and fine particulate gases intensify. Carbon monoxide has the highest positive correlation with cardiovascular disease hospital admission compared to other air pollutants. The autoregressive integrated moving average (0,1,1) with carbon monoxide and ozone as external regressors is the model with minimum Akaike information criterion.CONCLUSION: The carbon monoxide concentration in ambient air illustrates a potential risk for the increasing cardiovascular disease hospital admission number in Sabah. The study findings provide evidence-based source for the healthcare management team, policymakers, and community to sustain clean and safe ambient air.
Environmental Management
A.D. Santoso; F.D. Arianti; E.S. Rohaeni; B. Haryanto; M.D. Pertiwi; L.P. Panggabean; A. Prabowo; S. Sundari; S.P. Wijayanti; I.N. Djarot; F.D. Kurniawati; F.L. Sahwan; T. Prasetyo; A. Barkah; T.A. Adibroto; R. Ridlo; I. Febijanto; A.A. Wasil; S. Lusiana; R. Rosmeika; R.B. Heryanto
Abstract
BACKGROUND AND OBJECTIVES: Substantial quantities of livestock waste and organic pollutants, such as nitrogen and phosphate, which pose environmental risks are generated from agriculture activities. A combination of paunch manure and rice straw is used as organic fertilizer. Therefore, this study confirmed ...
Read More
BACKGROUND AND OBJECTIVES: Substantial quantities of livestock waste and organic pollutants, such as nitrogen and phosphate, which pose environmental risks are generated from agriculture activities. A combination of paunch manure and rice straw is used as organic fertilizer. Therefore, this study confirmed sustainability of organic fertilizer from paunch manure and rice straw waste.METHODS: Data were collected through focus group discussions and the closure of questionnaires which contained 29 attributes related to environmental, economic, social, and technological dimensions. The data collected was analyzed using the Multidimensional Scaling method, Rapfish software, and Monte Carlo analysis to ascertain the level of sustainability status and leverage attributes, and examine scoring errors and variations.RESULTS: Sustainability index for organic fertilizer production was 74.55 percent. The result showed that the method contributed to the growth of sustainability in various operational phases, including the processing and commercialization of organic fertilizer. According to analysis of the four dimensions, the environmental dimension held the highest leverage value at 90.1 percent, followed by social, economical, and technological dimensions at 70.50 percent, 63.69 percent, and 73.93 percent, respectively. This study identified seven leverage attributes that are very influential to sustainability of organic fertilizer production. These include water use and raw material efficiency, potential business scale increase, market absorption, the potential for public unrest, the manager or worker level of expertise in the manufacture of organic fertilizer as well as the process used to determine its quality and output.CONCLUSION: The proposed inquiry conducted within the context of this study identified the pivotal factors that influenced organic fertilizer supply framework as the quality, quantity, and market absorption of organic production. As a result, the o use of agricultural waste as a valuable addition to a perfect social, economical, and technological development system needs to be encouraged. The study is significant because it offered information about the viability of producing organic fertilizer in Indonesia, which the government and other stakeholders may use to guide their policies and programs.
Environmental Management
S. Syafrudin; J.M. Masjhoer; M. Maryono
Abstract
BACKGROUND AND OBJECTIVES: Population growth and economic activity in rural areas are factors driving the waste generation rate. Rural waste management generally still applies conventional patterns and has the potential to damage the environment and threaten human health. Challenges and remedial measures ...
Read More
BACKGROUND AND OBJECTIVES: Population growth and economic activity in rural areas are factors driving the waste generation rate. Rural waste management generally still applies conventional patterns and has the potential to damage the environment and threaten human health. Challenges and remedial measures for solid waste management in rural areas differ from urban ones. The first step in planning a waste management system is to identify the generation and characteristics of waste. Unfortunately, data on waste generation and characteristics in rural areas in developing countries are still minimal. The problems are mainly caused by the development of the tourism industry, and it certainly requires waste management as the solution. However, due to the unavailability of waste generation data, this study aims to measure and analyze waste characteristics in the southern zone of Gunungkidul Regency.METHODS: Primary data collection was taken from 16 randomly selected villages in six sub-districts in Gunungkidul Regency. A door-to-door survey was carried to 110 residential and 160 non-residential samples for eight consecutive days using the Indonesian National Standard 19-3964-1994 method. The processed data were analyzed using a quantitative descriptive method.FINDINGS: The results showed that the average waste generation was 0.29 kilograms per person per day. It shows that the waste generation in the study area is categorized in small-town classification. 75 percent of solid waste generated is food waste and leaves. Meanwhile, paper, plastic, glass, wood, other materials, and fabrics were calculated at 11.8 percent, 10.1 percent, 1.7 percent, 0.5 percent, 0.5 percent, and 0.4 percent respectively. Housing produced less recycled waste as indicated by a high density of 110.6 kilograms per cubic meter. Waste generation and composition are influenced by socioeconomic factors such as economic activity and lifestyle, geographic conditions, and downtown attractiveness.CONCLUSION: The characteristics of the waste produced by the southern zone of Gunungkidul Regency are not much different from most rural areas in developing countries. Rural waste management needs to see organic waste as the main management material. Organic waste processing through composting can be a future solution, but the active role of residents determines its success. In addition, this method can help extend the life of the landfill capacity because the volume of organic waste will be reduced by half.
Environmental Engineering
P. Saxena; S. Sonwani
Abstract
The indoor air quality is much more matter of concern as relative to ambient or outdoor air quality, especially in the context of human health. However, very few studies have been reported for remediation of indoor ozone by plant species. The main objective of this study is to evaluate ozone deposition ...
Read More
The indoor air quality is much more matter of concern as relative to ambient or outdoor air quality, especially in the context of human health. However, very few studies have been reported for remediation of indoor ozone by plant species. The main objective of this study is to evaluate ozone deposition velocities and ozone removal effectiveness of three indoor ornamental plant species (Dracaena deremensis, Tagetes erecta and Lilium candidum) that can be used in the remediation of indoor ozone. Ozone deposition velocity was estimated through measurement of leaf surface areas of selected plant species and exposing them to 3-regular daytime cycles where ozone concentrations under controlled conditions first increased from 8 h followed by 16 h in the absence of ozone. Values of ozone deposition velocity after the completion of first exposure were found maximum (7.7 m/h) in case of Dracaena deremensis and minimum (0.5 m/h) after the completion third exposure in Lilium candidum. The ozone removal effectiveness found in the range of 0.7 to 13% for leaf surface area to room volume ratio of 0.06/m with reference to an air exchange system and background loss present in an indoor environment. Among the selected plant species, Dracaena deremensis has got the highest ozone deposition velocity as well as ozone removal effectiveness and Lilium candidum has got the lowest values. Hence, this study concludes with the sustainable use of ornamental plant species in the remediation of the indoor ozone pollution, which can further help in improving the health condition of the residents.
Environmental Engineering
A.M. Vazquez; A. Samudio-Oggero; H.D. Nakayama; I. Cantero-García
Abstract
BACKGROUND AND OBJECTIVES: The Municipal Park of Areguais is located in the Central Department of Paraguay. Part of this Park is within the area of influence of Ypakarai Lake, which is widely recognized by vacationersfor its natural spaces. Despite being one of the most representative ecological reserves ...
Read More
BACKGROUND AND OBJECTIVES: The Municipal Park of Areguais is located in the Central Department of Paraguay. Part of this Park is within the area of influence of Ypakarai Lake, which is widely recognized by vacationersfor its natural spaces. Despite being one of the most representative ecological reserves in the country, annual waterquality reports indicate the presence of a high content of pollutants; mainly nitrogen, phosphorus, andfecalcolifoirs, among others. These conditions promote the proliferation of cyanobacteria which consume the available oxygenand compromise the reserve’s flora and fauna. Following several laboratory tests, the present work has the objective of evaluating the impact of thepark’s recently constructed wetland’son the treatment of residual waters.There are several parameters evaluated in thisstudy of final wastewater discharge disposal treatmentthrough a constructed wetland of horizontal flow with Typhadomingensis. The objective is to develop an adequate system for the treatment of residual waters that can be replicated in places with similar conditions.METHODS: The evaluation consisted of analyzing the residual water and finding the removal percentage for each of the following parameters such as chemical oxygen demand; biochemical oxygen demand; total phosphorus; total nitrogen; fecal coliforms; hydrogen potential; and temperature. The quality of the treated water was determined by comparing it with the limits established in Article 7 of Resolution Number 222/02 of the Environment Secretary for effluents. The results demonstrate that this system is aviableoption for the removal of fecal coliforms and nutrients such as phosphorus and nitrogen.FINDINGS: In terms of the quality of the treated water, the parameters studied are within the limits,established by Resolution Number 222/02of the Environment Secretary for Class 2 waters, for water to be discharged into the receiving body. The results obtainedwere: 88.9 percent fecal coliform removal; 84.9 percent total nitrogen; 73.3 percentchemical oxygen demand; 61.4 percent biochemical oxygen demand; and 14.2 percent Total Phosphorus. Considering Resolution 222/02, the biochemical oxygen demand, Total Nitrogen, and Total Phosphorus were outside the admissible limits.CONCLUSION: It is very feasible for wastewater generated in public parks to be treated through the construction of sub-surface flowwetlands.This study confirms that the treated wastewater is within the establishedlimitsfor all the parameters: temperature, hydrogen potential, biochemical oxygen demand, chemical oxygen demand, total nitrogen, total phosphorus, and fecal coliforms. This model of water treatment can be easily adopted.
Environmental Engineering
D. Utari; N.I. Hawa; G. Fizumli; H. Agustina
Abstract
BACKGROUND AND OBJECTIVES: Plastic pollution is increasing globally along with the growing consumption patterns of the global community, leading to practicality (social behavior). The primary contributors to pollution are single-use plastic (SUP) items and inadequate waste management techniques. This ...
Read More
BACKGROUND AND OBJECTIVES: Plastic pollution is increasing globally along with the growing consumption patterns of the global community, leading to practicality (social behavior). The primary contributors to pollution are single-use plastic (SUP) items and inadequate waste management techniques. This research attempts to examine local communities’ determinants and behavioral patterns regarding plastic waste management.METHODS: This cross-sectional analytical study includes 195 respondents and conducted at Antang Lake, Makassar. The social sciences statistical package version 26 was used to perform chi-square tests and multiple regression analysis to examine the main elements influencing individual behavior toward plastic waste management. A survey instrument was provided to participants for data collection.FINDINGS: The chi-square test results show that the knowledge variable has a statistically significant relationship with plastic waste management behavior at home, with a test statistical value of 0.002. Respondents with limited knowledge are 2.603 times more likely to have poor household plastic waste management behavior than those with substantial knowledge. The knowledge variable is also significantly related to household plastic waste management behavior simultaneously with a statistical test value of 0.000, showing a strong relationship. This variable influences 11.8 percent of the behavior in question. Attitude and action variables do not have a significant relationship partially or simultaneously with household plastic waste management behavior.CONCLUSION: Increased plastic consumption has led to microplastic pollution, environmental damage, and deteriorating health conditions. Thus, intervention is required to improve optimal waste management behavior in the community. Increasing awareness about environmental management and educating the public on the impact of microplastics on family health can contribute to enhanced knowledge awareness. This research aims encourage greater awareness of environmental condition to minimize toxicity resulting from the negative impacts of plastic waste.
Environmental Science
K. Narozhnykh
Abstract
BACKGROUND AND OBJECTIVES: Elemental status is associated with the biochemical processes occurring in the body. Beef, consumed worldwide, is an excellent source of iron in terms of quantity and bioavailability, providing up to 18 percent of the daily requirement. The level of iron in muscle tissue affects ...
Read More
BACKGROUND AND OBJECTIVES: Elemental status is associated with the biochemical processes occurring in the body. Beef, consumed worldwide, is an excellent source of iron in terms of quantity and bioavailability, providing up to 18 percent of the daily requirement. The level of iron in muscle tissue affects beef quality. Current methods used to assess iron content in cattle muscles are laborious and complex. Accordingly, the current study aimed to develop a fast and simple method to assess the elemental status of animals in vivo and in a minimally invasive way based on an effective model for iron-level prediction by using blood-analysis results toward ecological well-being. This method can overcome the shortcomings of currently used approaches.METHODS: Samples of diaphragmatic muscle weighing 100 grams, as well as blood samples, were obtained from Hereford cattle bred under typical conditions of an industrial complex in the south of Western Siberia, Russia. Elemental analysis was performed by atomic absorption method with electrothermal atomization. Regression analysis was conducted to estimate the relationships between iron level in the muscle tissue of Hereford cattle and independent values (blood parameters). An optimum model for predicting the iron level was established. The coefficients of regression models were calculated using the least squares method, and the values of the dependent variable corresponded with the Gaussian ones. A high correlation existed between independent variables.FINDINGS: An optimum model for predicting the iron level in the muscle tissue of Hereford cattle was established. It contained three predictors, namely, number of erythrocytes, color index, and globulin, as a result of selection based on internal and external-quality criteria. The model meets the necessary assumptions: the residuals are normally distributed, no autocorrelations exist, and the observations are influential. Furthermore, no signs of multicollinearity exist between the main effects of the model (variance-inflation factor = 1.2–1.7).CONCLUSION: The model can be used for the intravital analysis of iron level in the muscle tissue of cattle. In contrast to currently used methods, the approach proposed can be used for intravital analysis of the level of iron in muscle tissue, which is the most important advantage of the developed approach. The results can be used in ecology to assess ecological well-being and determine the allowable load of iron in animals. For veterinary medicine, the resulting model enables the evaluation of the iron level in the muscle tissue of Hereford cattle during their lifetime. Studying the effect of different factors on meat quality may allow to decrease or avoid useless measures used in farming, such as the excessive use of feed additives. In turn, these measures can decrease resource exploitation and increase farming productivity. Therefore, the results can guide the further development of sustainable farming.
Environmental Science
W.O.S. Rizki; E. Ratnaningsih; D.G.T. Andini; S. Komariah; A.T. Simbara; R. Hertadi
Abstract
BACKGROUND AND OBJECTIVES: Petroleum-based plastics produce tremendous amounts of plastic waste every year, which contributes to environmental problems. Biological polymers, such as polyhydroxybutyrate, have caught attention as an ecofriendly substitute to petroleum-based plastics. The present study ...
Read More
BACKGROUND AND OBJECTIVES: Petroleum-based plastics produce tremendous amounts of plastic waste every year, which contributes to environmental problems. Biological polymers, such as polyhydroxybutyrate, have caught attention as an ecofriendly substitute to petroleum-based plastics. The present study focused on the production, enhancement, and characterization of polyhydroxybutyrate from the prospective local bacterium Halomonas elongata. This research aimed to develop an environmentally sustainable material for reducing the accumulation of plastic waste in the ecosystem.METHODS: A local bacterial strain from Mud Crater Bledug Kuwu, Grobogan, Central Java, Indonesia, was isolated and identified as Halomonas elongata. Nile red staining method confirmed that this bacterium accumulated polyhydroxybutyrate. The effect of incubation time, sodium chloride concentration, nitrogen, and carbon sources were evaluated via gas chromatography to enhance its productivity. The functional groups of isolated polyhydroxybutyrate were analyzed using nuclear magnetic resonance and Fourier transform infrared spectroscopy. Morphology and composition were demonstrated by scanning electron microscopy and energy-dispersive x-ray spectroscopy. Thermogravimetric analysis, differential thermogravimetry, and differential thermal analysis were used to analyze thermal stability.FINDINGS: Halomonas elongata produced polyhydroxybutyrate utilizing glucose as a carbon source, as evidenced by orange-fluorescence colonies under ultraviolet light. The optimum condition of polyhydroxybutyrate production was achieved when the bacterium was cultivated in a high medium containing 5 percent sodium chloride, 0.2 percent yeast extract, and 5 percent glucose (as measured by weight per volume) after 72 hours of incubation. The maximum polyhydroxybutyrate production in this medium reached 2.93 ± 0.03 gram per liter dry cell weight and 78 ± 1 percent polyhydroxybutyrate concentration. Structural elucidation studies revealed that the biopolymer produced by this bacterium was high-purity polyhydroxybutyrate, as proven by the presence of functional groups and proton resonance signals in the monomer structure. The isolated polyhydroxybutyrate consisted of 14 percent carbon and 86 percent oxygen. Thermal stability analysis showed that the isolated polyhydroxybutyrate had a maximum decomposition temperature of 270 degrees Celsius. Micrographically, the isolated polyhydroxybutyrate appeared as a sheet structure with interconnected fibers measuring 0.7–0.8 micromter in length. This finding also demonstrates that the isolated polyhydroxybutyrate has good thermal stability given that fibers linked each polyhydroxybutyrate molecule, which boosted the structure of polyhydroxybutyrate.CONCLUSION: This study successfully synthesized polyhydroxybutyrate using a local strain of Halomonas elongata, with glucose as a carbon source. Physicochemical characterization revealed that polyhydroxybutyrate from this bacterium has a high thermal stability. The yield of polyhydroxybutyrate can be increased through the improvement of production parameters. This research emphasizes an important milestone toward the large-scale production of polyhydroxybutyrate for application as food packaging while reducing environmental issues.
Environmental Management
D. Wielgórka; W. Szczepaniak
Abstract
Eco-innovation is any innovation that leads to sustainable development by limiting the negative impact of production activities on the environment, increasing the resilience of nature to loads or ensuring greater efficiency and responsibility in the use of natural resources. Eco-innovations are the opportunity ...
Read More
Eco-innovation is any innovation that leads to sustainable development by limiting the negative impact of production activities on the environment, increasing the resilience of nature to loads or ensuring greater efficiency and responsibility in the use of natural resources. Eco-innovations are the opportunity for enterprises. Their introduction contributes to reducing the costs of doing business, allows you to take advantage of new opportunities development and positively affects the company's image. The main goal of the research is to recognize the situation and the level of eco-innovation in Poland, including the micro, small and medium enterprises sector and to compare the obtained results with the ones from European Union countries. The result of the research is indicating the barriers and opportunities to support the development of eco-innovation in the micro, small and medium enterprises sector in Poland. Lack of financial resources for eco-innovation was indicated as the largest barrier by MSMEs in Poland. The most significant barriers to eco-innovation in Poland are mainly of an economic nature, including the high cost of implementation, difficult access to capital, uncertain return on investment and the weak system of economic and fiscal incentives encouraging eco-innovation.
Environmental Management
A. Escobar; J. Luna; A. Caraballo
Abstract
BACKGROUND AND OBJECTIVES: Sustainable innovation is crucial, because it is a key strategy for ensuring the long-term survival of companies in a world with limited resources. Consequently, understanding the barriers faced by companies in achieving sustainable innovation, such as high initial cost, lack ...
Read More
BACKGROUND AND OBJECTIVES: Sustainable innovation is crucial, because it is a key strategy for ensuring the long-term survival of companies in a world with limited resources. Consequently, understanding the barriers faced by companies in achieving sustainable innovation, such as high initial cost, lack of technical knowledge, or unclear regulations, is important for developing appropriate policies, strategies, and solutions that promote and facilitate its adoption.METHODS: This study aims to analyze the relevant and most important scientific evidence and research topics on barriers to sustainable innovation through a bibliometric analysis combined with concurrence networks and cluster analysis using VOSViewer.FINDINGS: Research on barriers to innovation was developed on a larger scale in 2012 with an average growth of approximately 43 percent until 2022. During this period, the study on green innovation has been predominant and on the social component of sustainable innovation to a lesser extent. Asia, specifically China, is leading the research on this topic mainly on the environmental component of sustainable innovation. In terms of barriers, the majority of the literature focus on financial constraints. The research agenda focus on the following areas or clusters: sustainability, barriers to sustainable innovation, and social innovation.CONCLUSION: The major barriers to sustainable innovation are financial and government regulations. The current research tackles the environmental component of sustainable innovation. Therefore, future research should focus on market and knowledge barriers in developed and less developing countries and on the social component of sustainable innovation. Potential areas of research (which are underexplored) exist and can be important for future research on enhancing knowledge about barriers to sustainable innovation: applied research that considers regional effects and country-specific analysis, in particular in developing countries. Research on the social component of sustainable innovation could be relevant. Social innovation is essential, because it addresses concrete societal problems and promotes collective action and inclusion in novel ways within companies.
Environmental Management
T.T. Tran; Y.M.T. Nguyen; L.T. Pham; B.K. Veettil; S.N. Hoang; Q.X. Ngo
Abstract
The Lo Go-Xa Mat is a national park in the southeastern region of Vietnam, which has a particularly high biodiversity and it includes different wetlands which are unique diverse in species composition. It can be categorized into two types: temporarily-seasonally and permanently flooded wetlands. Ta Not ...
Read More
The Lo Go-Xa Mat is a national park in the southeastern region of Vietnam, which has a particularly high biodiversity and it includes different wetlands which are unique diverse in species composition. It can be categorized into two types: temporarily-seasonally and permanently flooded wetlands. Ta Not grassy marsh is representative of the seasonally flooded wetland. Whilst the diversity and ecology of plants and mammals are well documented, little or no information of the benthic ecology in the seasonally flooded wetland exist. This study aims to provide a new database of the nematode’s structure in the seasonally flooded wetland and its relation with environmental variables as well as detection of the ecological quality, considering nematodes as bioindicators. This work is the first investigation on nematodes communities in associate with some environmental variables in the Ta Not grassy marsh. The results showed that free-living nematodes in the Ta Not seasonally flooded grassy marsh are characterized by the high density (ranged from 235.01 to 898.43 inds.10cm-2) but rather low diversity. More specifically, the genus richness (S) ranged from 8.20 to 8.60. The observed Margalef’s species richness (d) was ranging from 1.07 to 1.53 and the Shannon-Wiener index (H') was measured from 2.36 to 2.52. In addition, the Pielou's evenness (J′) ranged from 0.55 to 0.68 and the Hill indices indicated average values ranging between 5.46- 5.84 for N1, between 4.32-4.60 for N2, and between 2.64-2.86 for Ninf. Specifically, our results indicated that deep level, pH, and NH4+ showed a significant correlation with the nematode density and bio-indices. The sediment of the Ta Not grassy marsh was assessed as in good conditions in all stations based on the Maturity Index of nematodes.
Environmental Engineering
A. D. Santoso; T. Handayani; D. Pinardi; K. Kusrestuwardani; N. Widyastuti; I. N. Djarot; J. Haryanti; A. I. Sitomurni; H. Apriyanto
Abstract
BACKGROUND AND OBJECTIVES: Palm oil mill effluent is a liquid waste produced at a palm oil mill industry during the production process containing abundant organic pollutants such as nitrogen and phosphorus that will be harmful to the environment. However, palm oil mill effluent as a nutrient for the ...
Read More
BACKGROUND AND OBJECTIVES: Palm oil mill effluent is a liquid waste produced at a palm oil mill industry during the production process containing abundant organic pollutants such as nitrogen and phosphorus that will be harmful to the environment. However, palm oil mill effluent as a nutrient for the growth of microalgae has the potential for pollutant removal as well as algae biorefinery products such as biofuel, functional food and many others. This research objectives to analyze the sustainability of the microalgae biomass production for bio-refinery based on the sustainability index assessment. METHODS: The primary data was compilated via the questionnaires to researchers in the community of microalgae as well as scientific judgment by experts as respondents. Data is processed and analyzed using the multidimensional scaling Rapfish program. Data analyzed was conducted by analyzing four dimensions: social, economic, ecological, and technological dimensions which consisting of 47 attributes.FINDINGS: The result showed that the sustainability index calculated was 73.53 percent (good), which indicates the process has the potential to be developed while paying attention to leverage factors in every dimension of the sector. Analysis of each dimension on the 4 dimensions shows that the environment dimension is lowest in 67.30 percent, while the economy, technology and social dimension are 70.99 percent, 73.67 percent and 82.17 percent, respectively. Some leverage attributes that require more attention in order to improve sustainability are management experience and skills (in environment dimension), involvement of family member (in the social dimension), the productivity level (in economic dimension), and management of experience and skill (technological dimention).CONCLUSION: Based on the prospective analysis, it is known that there are 4 key factors or dominant factors that are very influential in the microalgae supply system, namely production, productivity, land conversion, consumption per capita and population. It is still necessary to do further research for the utilization of microalgae biomass into value-added products with an optimal, technically, economically, environmentally and socially sustainable system. The study provides insights on the feasibility of the proposed sustainable concept in Indonesia for the government to arrange policies and programs.
Environmental Management
N. Laili; T. Djatna; N.S. Indrasti; M. Yani
Abstract
BACKGROUND AND OBJECTIVES: The coffee agroindustry in Indonesia plays a significant economic role as the third largest coffee producer worldwide. Despite the high economic contribution, the coffee agroindustry also raises environmental issues along its supply chain. Coffee solid waste constitutes biomass ...
Read More
BACKGROUND AND OBJECTIVES: The coffee agroindustry in Indonesia plays a significant economic role as the third largest coffee producer worldwide. Despite the high economic contribution, the coffee agroindustry also raises environmental issues along its supply chain. Coffee solid waste constitutes biomass containing useful compounds promising as raw materials for added-value products through the implementation of industrial symbiosis. Eco-industrial parks create value through industrial symbiosis, emphasizing the principle of a closed-loop production system, simultaneously decreasing the use of raw materials and waste. This study aimed to analyze and develop a coffee-based eco-industrial park design via a systems engineering approach and optimization of industrial symbiosis in closed-loop coffee production.METHODS: This study employed a case study in the Ketakasi coffee-producing center in Jember, Indonesia. Data collection was conducted through field observation and a series of in-depth interviews. The development of eco-industrial park design followed a systems engineering methodology, as demonstrated through the utilization of Business Process Model and Notation. Subsequently, the optimization of industrial symbiosis within eco-industrial parks was realized using a mixed-integer linear programming mathematical model.FINDINGS: The eco-industrial park design presents the actors, internal business processes, material and data exchanges, various actors’ interdependence and critical roles in material exchanges, and value creation processes using valorization within the eco-industrial park. The role of the Ketakasi cooperative as a facilitator of material exchange and manager of the eco-industrial park is pivotal. The utilization of data integration enhances the transparency and efficiency of information exchange among eco-industrial park participants, promoting predictability and reliability in material exchange. The application of the mixed-integer linear programming optimization model has provided a structured approach to maximizing the value creation within the eco-industrial park through the valorization of 72.3 percent of coffee pulp and 68.5 percent of spent coffee grounds into cellulase enzymes and ultraviolet shields.CONCLUSION: This paper presents a structured framework for efficiently managing material exchange processes within an eco-industrial park, contributing to environmental sustainability and economic value creation. This study contributes to the knowledge gap in the literature by developing an inclusive eco-industrial park design that facilitates the optimization of the value creation process through valorization technology. This study also adds to sustainable agriculture management literature through a coffee-based eco-industrial park design.
Environmental Management
A.D. Santoso; T. Handayani; R.A. Nugroho; A.I. Yanuar; N. Nadirah; E.S. Rohaeni; E. Widjaja; M.A.M. Oktaufik; U. Ayuningtyas; Y.P. Erlambang; R. Herdioso; M.N. Rofiq; R. Hutapea; A.L. Sihombing; B. Rustianto; I.M.A.D Susila; D. Irawan; D. Iskandar; S. Indrijarso; G.D. Widiarta
Abstract
BACKGROUND AND OBJECTIVES: Most food waste is dominated by domestic activities consisting of large numbers of organic pollutants, such as nitrogen and phosphate potentially hazardous to the environment. Domestic waste can be used as a feed source in black soldier fly cultivation with utility in pollutant ...
Read More
BACKGROUND AND OBJECTIVES: Most food waste is dominated by domestic activities consisting of large numbers of organic pollutants, such as nitrogen and phosphate potentially hazardous to the environment. Domestic waste can be used as a feed source in black soldier fly cultivation with utility in pollutant removal, animal feed production, and compost fertilizer. Therefore, this study aimed to determine sustainability of larvae from black soldier fly cultivation by calculating and analyzing index.METHODS: Data collection was conducted using the scientific judgment of experts and business actors in black soldier fly through Focus Group Discussion and the filling out of questionnaires consisting of 31 attributes connected with environment or ecology, economics, social, and technology dimensions. Furthermore, the data were calculated using the multi-dimensional scale approach with rapid appraisal software. Sustainability status and leverage attributes were analyzed by Monte Carlo analysis, and alternating least-squares algorithm.FINDINGS: Sustainability index for larvae of black soldier fly production was 89.69 percent. The result suggested that the technique in several stages of operation including waste collection, cultivation, harvesting, and commercialization contributed to sustainability development when the elements of strength of each dimension are considered. From the analysis of the four dimensions, economic dimension had 100 percent or maximum leverage value. The environmental and social dimensions had the same leverage values of 92.02 percent, while the technological dimension had 74.74 percent. The results indicated that management experiences and techniques, potential for odor generated, family member involvement, productivity level, and managers level, warrant further attention to improve sustainability of black soldier fly production.CONCLUSION: Production, productivity, land conversion, and population were identified as significant or dominating factors impacting the supply framework of black soldier fly production by the intended investigation inside the display ponders. Therefore, study should be encouraged to effectively integrate black soldier fly biomass as a value-added component in an ideal environmental, social, economic, and technical system. The results are significant in providing insights into the possibility of feasible black soldier fly biomass production in Indonesia, which can inform government policies and programs.
Environmental Science
S.H. Larekeng; M. Nursaputra; M.F. Mappiasse; S. Ishak; M. Basyuni; E. Sumarga; V.B. Arifanti; A.A. Aznawi; Y.I. Rahmila; M. Yulianti; R. Rahmania; A. Mubaraq; S.G. Salmo III; H. Ali; I. Yenny
Abstract
BACKGROUND AND OBJECTIVES: Mangroves play a crucial role in mitigating climate change by absorbing carbon stocks. However, there is a lack of information on mangrove distribution and their carbon absorption abilities. Therefore, this study aimed to bridge this gap by gathering data on the ability of ...
Read More
BACKGROUND AND OBJECTIVES: Mangroves play a crucial role in mitigating climate change by absorbing carbon stocks. However, there is a lack of information on mangrove distribution and their carbon absorption abilities. Therefore, this study aimed to bridge this gap by gathering data on the ability of mangrove forest areas to absorb carbon stocks. Specifically, this study aims to assess the carbon absorption potential of the Lantebung mangrove ecosystem through field surveys, allometric calculations, and unmanned aerial vehicle imagery.METHODS: The methodology employed in this study consisted of field surveys, allometric calculations, and multispectral aerial imagery processing along the coastal of Makassar City, South Sulawesi, within the Lantebung mangrove ecosystem. Field surveys were conducted to determine the species composition of each mangrove stand and measure their diameter at breast height. The allometric formula was then used to calculate mangrove biomass, which was subsequently converted into carbon stock values. Aerial imagery was processed using the normalized difference vegetation index, followed by a regression analysis between normalized difference vegetation index and carbon stock values to obtain a carbon stock estimation model.FINDINGS: The results of the analysis of red-green-blue aerial imagery from the multispectral unmanned aerial vehicle has provided valuable insights into the extent of mangrove vegetation cover in the Lantebung mangrove forest area, revealing it to be 14.18 hectares. The normalized difference vegetation index results indicated that mangrove objects fall within a value range of 0.21–1, categorized into three density classes: high-, medium-, and low-density mangroves. The field surveys confirmed the presence of three types of mangroves in Lantebung Makassar, namely Rhizophora apiculata, Rhizophora mucronata, and Avicennia sp. The regression analysis conducted to assess the relationship between the normalized difference vegetation index value and carbon stocks yielded the equation model carbon stock = 474.61, vegetation Index value + 17.238, with a linear regression value of 0.7945. The carbon stock values for low-density class mangrove areas were predicted to range between 17.24 and 288.64 tons carbon per hectare, medium-density mangroves' carbon stocks to be between 126.04 and 391.14 tons carbon per hectare, and high-density mangrove areas' carbon stocks to range from 258.04 to 491.85 tons carbon per hectare.CONCLUSION: The utilization of drones as a technique for monitoring carbon stocks has offered significant benefits. Drones equipped with multispectral sensors enable the collection of precise and comprehensive data on vegetation and elevation in many ecological systems. The survey and subsequent analysis highlighted the wide variation in the density of mangrove forests in the Lantebung mangrove ecosystem. This study demonstrated a strong correlation between the normalized difference vegetation index extracted using unmanned aerial vehicle and mangrove carbon levels obtained from actual field measurements.
Environmental Management
A. Mesjasz-Lech
Abstract
The markets globalization is one of the factors creating conditions for the development of entrepreneurship. Entrepreneurship does not have one generally accepted definition. Most often, entrepreneurship is perceived as the ability to increase the number of enterprises. Entrepreneurship can be understood ...
Read More
The markets globalization is one of the factors creating conditions for the development of entrepreneurship. Entrepreneurship does not have one generally accepted definition. Most often, entrepreneurship is perceived as the ability to increase the number of enterprises. Entrepreneurship can be understood as the potential to identify and use development opportunities regardless of own resources. Entrepreneurship is therefore associated with such areas as new organizational forms, stimulation of innovation and cooperation with the entrepreneurial environment. Unfortunately, enterprises face many difficulties which can have the supply and demand nature. These difficulties hinder the enterprise functioning on the market and its development. Logistics performance perceived as the implementation of the highest quality of logistics standards allows overcoming the difficulties of entrepreneurship, especially for the transport and storage sector. For this reason, the article aims to determine the relationship between logistics performance and the entrepreneurship rate for selected European Union countries. Logistics performance was determined by a synthetic measure of development estimated using numerical taxonomy methods for variables forming the Logistics Performance Index. The same method was used to build the entrepreneurship rate, accepting as variables selected entrepreneurship indicators for the transport and storage sector. The correlation analysis was performed with the use of the Spearman rank correlation coefficient. The years 2014-2016 were analyzed. The availability and completeness of data dictated the choice of years, countries and indicators for analysis.
Environmental Engineering
B. Kartiwa; . Maswar; A. Dariah; . Suratman; N.L. Nurida; N. Heryani; P. Rejekiningrum; H. Sosiawan; S.H. Adi; I. Lenin; S. Nurzakiah; Ch. Tafakresnanto
Abstract
BACKGROUND AND OBJECTIVES: To minimize the potential risk of land fires, climate monitoring and hydrology characterization are crucial factors in managing peatlands. Therefore, this study aimed to investigate the relation between climate variability and water dynamics to develop a peatland fire early ...
Read More
BACKGROUND AND OBJECTIVES: To minimize the potential risk of land fires, climate monitoring and hydrology characterization are crucial factors in managing peatlands. Therefore, this study aimed to investigate the relation between climate variability and water dynamics to develop a peatland fire early warning model.METHODS: This research was conducted in an oil palm plantation located in Pangkalan Pisang village, Koto Gasib subdistrict, Siak district, Riau province, Indonesia. Herein, the observed parameters were climate and dynamics of ground water level and soil moisture, which were monitored using data loggers installed on predefined representative locations and distributed over three blocks of 30 hectares in the palm oil plantation research site. Thus, the peat fire early warning model was developed based on the relation between peat water dynamics and the recorded history of peat fire events.FINDINGS: Herein, a recession curve analysis of soil moisture and ground water level revealed the relation between soil water dynamics and local climate. Consequently, this study found that soil moisture was the suitable parameter to estimate peat fire risk owing to its predictability. Furthermore, this study has identified a threshold of low and high peat fire risk in the area with less than 104 percent and 129 percent dry weight of soil moisture content, respectively. Afterward, this soil moisture criterion was transferred into precipitation value to develop a peat fire early warning model for estimating the days left before a high peat fire risk status was attained based on the latest daily rainfall rates.CONCLUSION: This study has developed a simple peat fire early warning model using daily precipitation data. The accurate estimation of countdown days to peat fire susceptibility status in an area would enhance fire mitigation strategies in peatlands.
Environmental Science
E. Budianto; S.H. Astuti
Abstract
Nifedipine is a hypertension drug must be consumed three times a day due to its low oral bioavailability. One way of developing a controlled drug delivery system is making nifedipine microcapsules by using environmentally friendly polymers of polylactic acid and polycaprolactone via the evaporation method ...
Read More
Nifedipine is a hypertension drug must be consumed three times a day due to its low oral bioavailability. One way of developing a controlled drug delivery system is making nifedipine microcapsules by using environmentally friendly polymers of polylactic acid and polycaprolactone via the evaporation method using oil-in-water solvents. Polylactic acid and polycaprolactone can be said to be environmentally friendly polymers, because they can be degraded naturally in nature both in the biotic, and abiotic environment, or microorganism. In this study, polylactic acid, Polycaprolactone, and nifedipine were dissolved in dichloromethane solvent; then, an emulsifier was added for the emulsification stage. After passing through the dispersion stage for the process of compaction of the microcapsules by solvent evaporation, the microcapsules were filtered. Microcapsules were characterized using particle size analysis, X-ray diffractometry, and scanning electron microscopy, respectively. The drug release percentage was determined by dissolving microcapsules for 55 hours using a buffer at the potential of hydrogen 1.2 and pH 7.4 as dissolution media. In this study, all variations in the composition of polyblend resulted in a percent efficiency of encapsulation ranging from 78.82%-89.84%, and percent release ranging from 6.80%-39.07%. The composition of 100% polylactic acid produces the highest percent encapsulation efficiency of 89.84% but produces the lowest percentage of drug release at 6.80%. The best composition obtained was polylactic acid: polycaprolactone 1:9 (weight per weight), with a percent release of 39.07% and percent encapsulation of 78.82%. Microcapsule solids produced are approximately 96%. Particle Size of microcapsule ranges at 0.5 μM.
Environmental Management
N. Saif; G.G.G. Goh; J.W. Ong; I.U. Khan
Abstract
BACKGROUND AND OBJECTIVES: The current study investigates green transactional leadership for the first time in order to understand leader-follower relations in studying green behavior in higher education institutions. The aim of this study is to investigate the dynamic relationship between green transformational ...
Read More
BACKGROUND AND OBJECTIVES: The current study investigates green transactional leadership for the first time in order to understand leader-follower relations in studying green behavior in higher education institutions. The aim of this study is to investigate the dynamic relationship between green transformational leadership, green transactional leadership and green creativity that are mediated by green intrinsic motivation.METHODS: This study used adapted constructs from previous environmental research as well as a newly-developed green transactional leadership construct. Responses were obtained from university students working on their final-year projects. In order to evaluate the model, partial least squares structural equation modeling using Measurement model assessment was used to validate the structural and measurement model.FINDINGS: Findings indicate that green intrinsic motivation significantly influences the relationship between green transformational leadership and green creativity (Beta=0.321; t=3.129), as well as green transactional leadership and green creativity (Beta=0.114; t=2.322). However, green transformational leadership is a stronger predictor in comparison to green transactional leadership in nurturing green creativity among students to provide viable solutions to existing products/processes. The R2 or contribution given by green transformational leadership and green transactional leadership on green creativity was 45.7 percent while the contribution of green transformational leadership, green transactional leadership and green creativity on green intrinsic motivation was 57.7 percent.CONCLUSION: Policy makers must focus their attention on promoting green transactional and transformational leadership that will directly enhance students’ motivation to promote the green creativity through innovative product/service model innovation.
Environmental Science
D. Syukri; H. Suryanto; F. Kurniawan; P.D. Hari; R.M. Fiana; . Rini
Abstract
BACKGROUND AND OBJECTIVES: Constructing a nanocellulose membrane from biomass waste can lessen harmful environmental effects owing to its ability to absorb chemical and microbiological impurities. Therefore, nanocellulose membranes with magnetic properties were developed as a powerful apparatus for reducing ...
Read More
BACKGROUND AND OBJECTIVES: Constructing a nanocellulose membrane from biomass waste can lessen harmful environmental effects owing to its ability to absorb chemical and microbiological impurities. Therefore, nanocellulose membranes with magnetic properties were developed as a powerful apparatus for reducing microbials and dyes in water.METHODS: In this study, bacterial cellulose acetate-based nanocomposite membrane with ferrous-ferric oxide nanoparticle reinforcement was produced from pineapple peel biowaste extract through fermentation and esterification. High-pressure homogenization was used to produce nano properties of cellulose from pineapple. Meanwhile, the ultrasonic homogenizer was used to mix the produced nanocellulose with the ferrous-ferric oxide with various treatment (0.25, 0.50, 0.75, and 1.0 weight percent of cellulose acetate) to produce nanocomposite membrane. The membrane was then applied for the removal of bacteria and dyes. The samples were water from local rivers located near industries such as rubber, cement, and tofu industries. The effectiveness of the nanocomposite membrane at bacteria and dyes reduction was assessed.FINDINGS: Nano cellulose membrane effectively reduced gram-negative bacteria and anionic dyes in the water samples. The ferrous-ferric oxide reinforcement enhanced the effectiveness of the membrane on bacteria and dye reduction. The addition of ferrous-ferric oxide resulted in a greater amount of dye degradation, and the presence of ≥0.75 percent ferrous-ferric oxide indicated an optimum ability to kill bacteria.CONCLUSION: Ferrous-ferric oxide yielded good results in reducing the number of microbes and anionic dyes in the water samples tested. The results of this research can be used as basic data to advance the use of nanocellulose membranes as a biomaterial for controlling environmental impacts.
Environmental Management
B. Parsafar; M. Ahmadi; Gh.R. Jahed Khaniki; N. Shariatifar; A. Rahimi Foroushani
Abstract
BACKGROUND AND OBJECTIVES: Receiving nutrients from fruits and vegetables are essential for public health. However, a large amount of waste is produced during producing, supplying, and consuming these fruits and vegetables. Water, fertilizers and pesticides used for the production of agricultural ...
Read More
BACKGROUND AND OBJECTIVES: Receiving nutrients from fruits and vegetables are essential for public health. However, a large amount of waste is produced during producing, supplying, and consuming these fruits and vegetables. Water, fertilizers and pesticides used for the production of agricultural products can affect the soil and their cultivation environment and finally lead to environmental pollution. Therefore, this study aimed to investigate the amount of fruit and vegetable waste caused by corruption and evaluate its economic loss and health damage.METHODS: The data were collected using the observation technique aided by observation tools and weighing tests to physically analyze and determine the quantity and quality of waste from Tehran’s fruit and vegetable distribution centers. In each center, the waste obtained from fruits and vegetables was stored in special waste tanks at the end of the day, and the waste was transported to outside the center by special waste disposal vehicles. The economic loss of unusable fruits and vegetables was calculated according to the weight of their waste in the fields of agricultural product supply. The data were analyzed using statistical software SPSS, ANOVA statistical test, and Excel software.FINDINGS: The results revealed that the amounts of fruit and vegetable wastes were 12 percent and 24 percent, respectively, accounting for a total loss of 54,891,539 USD. The highest quantity of fruit waste (15 percent) was observed in summer, and the economic loss due to fruit waste was higher in this season. Also, the amounts of vegetable waste in summer and spring were equal to 28 percent and 24 percent, respectively, indicating the higher economic loss due to vegetable in these seasons.CONCLUSION: The results showed that the economic loss due to vegetable waste was greater than the economic loss due to fruit waste. The amount of vegetable waste was 24 percent, representing a high economic loss. The generation and disposal of these wastes caused a great economic loss and health problems due to their unpleasant odor, release of leachate into the environment, and landfill pollution. Therefore, it was recommended to follow appropriate production principles and supply operations. Moreover, a comprehensive waste disposal management, as a practical measure, should be used to prevent and control these problems. The use of modern technology in harvesting, transporting and supplying fruits and vegetables could reduce their lesion, and subsequently reduce the economic loss.
Environmental Science
I. Marzuki; I. Pratama; R. Asaf; A. Athirah; K. Nisaa; N. Nurbaya; M. Muslimin; N. Nurhidayah; S. Suwardi; A. Sahrijanna; K. Kamaruddin
Abstract
BACKGROUND AND OBJECTIVES: The quality and production volume of the cultivation of tiger prawn Penaeus monodon have decreased considerably in the last two decades. However, intensification and extensification efforts, including the application of cultivation technology through pond land recovery, have ...
Read More
BACKGROUND AND OBJECTIVES: The quality and production volume of the cultivation of tiger prawn Penaeus monodon have decreased considerably in the last two decades. However, intensification and extensification efforts, including the application of cultivation technology through pond land recovery, have not produced expected results. Visible symptoms suggest potential issues with the cultivation water possibly originating from exposure to heavy metal pollutants. Therefore, this study aimed to remove heavy metal pollutants by using sponge symbiont bacteria bioremediators to increase the survival rate and quality of tiger prawn production. The achievements of this research are expected to contribute to the scientific development of environmental microbiology, bioremediation, and aquaculture pollution control.METHODS: The study utilized Bacillus pumilus and Pseudomonas stutzeri bacteria. The water used for tiger prawn post-larvae cultivation was treated with these bioremediator bacteria. The water had copper and lead ion concentrations that were 20 times greater than the maximum threshold value. The physical and chemical characteristics and parameters, such as dissolved organic matter, nitrite, nitrate, and ammonia contents, of the cultivation water were monitored over a 30-day period. The specific growth rate in terms of weight and body length and the survival rate of the tiger shrimps were measured to evaluate the effect of the bioremediation process on the prawns. The concentrations of copper and lead ions in the cultivation water and within the body of the tiger shrimps were analyzed. The health of the tiger prawns was evaluated by observing signs of tissue damage.FINDINGS: Among all the treatments, Treatment I with copper ion exposure had the highest average specific growth rate of the tiger prawns in terms of weight and body length, followed by Treatment II with lead ion exposure and Treatment III with a combination of both pollutants (the lowest). The intersection of copper and lead ion concentrations in the tiger prawns and cultivation media occurred in the cultivation period of 15–20 days. The use of Bacillus pumilus and Pseudomonas stutzeri bacteria as bioremediators effectively remediated the copper and lead pollutants at an average of 99.34 percent and 97.18 percent of the initial concentration, respectively. Despite the bioremediation efforts, the tiger shrimps exhibited symptoms of tissue damage in the head, tail, and shell. These symptoms included necrosis, myopathy, and infiltration, which are indicative of decreased cell function due to the presence of toxic agents.CONCLUSION: Bioremediation with Bacillus pumilus and Pseudomonas stutzeri bacteria helped reduce the accumulation of heavy metal pollutants. However, negative effects on the health and growth of tiger prawns were still observed when the prawns were exposed to copper and lead ion concentrations below the allowed threshold value.
