TY - JOUR ID - 24425 TI - Reactive dye extraction utilizing regenerated bleaching earth JO - Global Journal of Environmental Science and Management JA - GJESM LA - en SN - 2383-3572 AU - Shahi, M. AU - Sabour, M.R. AU - Dezvareh, G.A. AD - Department of Civil Engineering, K. N. Toosi University of Technology, Tehran, Iran Y1 - 2017 PY - 2017 VL - 3 IS - 3 SP - 299 EP - 310 KW - Acid washing activation KW - Activated virgin bleaching earth (AVBE) KW - Reactive dye adsorption KW - Response surface methodology (RSM) KW - Spent bleaching earth (SBE) KW - Thermal remediation DO - 10.22034/gjesm.2017.03.03.007 N2 - Bentonite bleaching earth is utilized for purifying used motor oil through a recovery process in order to improve the quality and stability of the final product. Indeed, spent bleaching earth is generated due to adsorbing oil impurities. Polluted spent bleaching earth contains 20-40% (w/w) oil and is flammable. Its disposal without pre-treatment leads to loss of oil along with environmental impacts. Accordingly, similar studies have been conducted since 1979 until now. This research was a laboratory study on reactive dye adsorption. Cleaning bleaching clay, thermal remediation and acid washing activation methods were utilized. Response surface methodology was used to design the experiments and determine the optimal parameters in order to run the dye adsorption process. The main experimental parameters have been concluded as temperature (200-800 °C), acid solution concentration (0.1-3 M), dye solution concentration (1-35 ppm), and ratio of activated earth to dye solution (0.1-2 %, w/w). Results revealed that dye adsorption process along with oil removal at a temperature of 650 °C, acid solution concentration of 0.83 M, dye solution concentration of 11.75 ppm and ratio of activated earth to dye solution of 1.52 % (w/w) results in an adsorption efficiency of 68.57%. This removal efficiency is a bit higher than activated virgin bleaching earth and much higher than virgin bleaching earth, which has adsorption capacities of 66.75% and 51.56%, respectively. Considering this recycling process, the purified material is quite acceptable technically, environmentally and economically. UR - https://www.gjesm.net/article_24425.html L1 - https://www.gjesm.net/article_24425_8004896bae7e5f56a5e221209a16076c.pdf ER -