Environmental Science
P. Srikanth; D. Sivakumar; J. Nouri
Abstract
Microorganisms are present in nature and shape an enormous a half of our micro- and macro-environment. Quorum sensing is the process of intercellular conversation that enables microbes to perceive their surroundings and change their behaviour, allowing them to remain like cellular organisms. Both Gram-positive ...
Read More
Microorganisms are present in nature and shape an enormous a half of our micro- and macro-environment. Quorum sensing is the process of intercellular conversation that enables microbes to perceive their surroundings and change their behaviour, allowing them to remain like cellular organisms. Both Gram-positive and Gram-negative microorganisms use quorum sensing frame work for communicating with every other, though there may be distinct quorum sensing pathways available in Gram-positive and Gram-negative microorganisms. The scope of quorum sensing extends to inter-nation communication, mediate through numerous newly diagnosed extra-cell signal molecules known as autoinducers. The concentration of these signalling substances rises above a critical level when the population density does, causing particular gene expression patterns in the microorganisms. This may result in coordinated behaviours, including the development of biofilms, the generation of virulence factors, or other group activities. Without the ability to detect and react to the presence of their neighbours, microbial communities would not be able to adjust to changing environmental conditions or carry out collective actions that are essential for survival. Among those autoinducers, five major principal signal molecules are perturbed about side the classical quorum sensing system. The larger part of quorum sensing recognizing inhibitor takes bacterial quorum sensing share identifying as the even-handed and simply blocks the larger part recognizing plan of pathogenic organisms, which can demolish the pathogenicity of microorganisms without applying explicit squeezing factor, and doesn't execute the regular organisms or then again intrude with their standard physiological activities. To talk with each other, bacteria mix, release, and total minimal diffusible signal molecules, known as pheromones or autoinducers a pheromone (recognizing) depends upon its edge centre. Specific receptors found on the surface of the bacterial cell are required for the identification of pheromones or autoinducers. The proteins that can bind to diffusible signalling molecules often make up these receptors. These receptors bind to signalling molecules when their concentration rises over a predetermined threshold, setting off a signalling cascade that causes the bacteria to respond in concert. The prevailing article will speak about checking out basic variations between numerous quorum sensing systems in gram passitive and gram negative bacteria, and it is important to understand the communications of microorganisms in nature better. QS sensing will help as a regular language for signal communication of various microorganisms, yet the path where all proteins get the signals and turn on downstream sign transduction has changed phenomenally.
Environmental Science
D. Sivakumar; P. Srikanth; P. W. Ramteke; J. Nouri
Abstract
The amount of agricultural waste generated by agro-based industries such as palm oil, rubber, and wood processing plants have more than tripled. Selangor, Perak, and Johor account for 65.7 percent of the total number of recognised pollution sources in the manufacturing and agro-based sectors. Livestock ...
Read More
The amount of agricultural waste generated by agro-based industries such as palm oil, rubber, and wood processing plants have more than tripled. Selangor, Perak, and Johor account for 65.7 percent of the total number of recognised pollution sources in the manufacturing and agro-based sectors. Livestock dung is another major cause of pollution, contributing significantly to increase pollution levels in the environment. Large portion of agro-industrial waste is untreated and unused, it is frequently disposed of by replicating or dumping then again off the cuff landfilling. These untreated wastes wreak havoc on natural change by releasing ozone-depleting chemicals. Aside from that, the usage of fossil fuels is also leading to an increase in ozone-depleting compounds. Agro-waste is a huge environmental hazard in the current epidemic situation. The management of agro-waste and the conversion of agro-waste into a usable product through the application of biotechnological technologies in agriculture are receiving a lot of attention in today''s world. Solid state fermentation is the finest approach for converting agro-waste into valuable bio products among biotechnological instruments. Various agro-wastes such as wheat straw, barley straw, cotton stalks, sunflower stacks, and oil cakes from various agriculture goods, as well as major horticulture wastes such as apple, mango, orange peels, and potato peels, were used to create beneficial products in this review. All aspects of the production of industrial products from various agro-waste by using microorganisms such as Amycolatopsis Mediterranean, Xanthomonas campestries, and Aspergillus niger producing biopolymers such as polysaccharides, similar to starch, cellulose, agar, hemi-celluloses, gelatin, alginate, and carrageenan are covered in the current revels. Yeasts and cyanobacteria are commonly employed to make bio-lipids, whereas Bacillus species are utilised to make proteins and bio-enzymes. Cucumber and orange strips, on the other hand, have recently been employed to create proteins and bio-enzymes. As a result, this review covers the many forms of agro-wastes and their by-products as well as biotechnological technologies used to treat them.
D. Sivakumar
Abstract
Taguchi L9 orthogonal array was implemented to select optimum values of process parameters and to attain the maximum removal of pollutants and power generation from dairy industry wastewater using double chambered salt bridge microbial fuel cell. The maximum chemical oxygen demand reduction, current, ...
Read More
Taguchi L9 orthogonal array was implemented to select optimum values of process parameters and to attain the maximum removal of pollutants and power generation from dairy industry wastewater using double chambered salt bridge microbial fuel cell. The maximum chemical oxygen demand reduction, current, voltage, power, current density and power density in double chambered salt bridge microbial fuel cell from dairy industry wastewater was found to be 86.30 %, 16.10 mA, 886.34 mV, 14.27 mW, 1219.69 mA/m2 and 1081.06 mW/m2 respectively for the optimum value of 1M NaCl concentration, 10 % agar concentration and 0.10 m salt bridge length. Double chambered salt bridge microbial fuel cell was not only removed chemical oxygen demand and produced power, but it also removed other pollutants at the maximum level against the best optimum value of process parameters from the dairy industry wastewater. The proposed regression model was used to select the right combination of process parameters for obtaining a maximum reduction of pollutants and simultaneous power production from the dairy industry wastewater.
D. Sivakumar; J. Nouri; T.M. Modhini; K. Deepalakshmi
Abstract
Water is prime requirement for surviving of any living beings. The existence of surface water and groundwater sources are used for domestic, agriculture and industrial purposes in all over the world. Fresh water from both the water sources is highly contaminated in recent years because of rapid ...
Read More
Water is prime requirement for surviving of any living beings. The existence of surface water and groundwater sources are used for domestic, agriculture and industrial purposes in all over the world. Fresh water from both the water sources is highly contaminated in recent years because of rapid population growth, modern agriculture and industrial growth. Among them, contamination of water sources due to industrialization is high and it requires more attention to protect those water sources. In this study, nickel removal from electroplating industry wastewater was done with the help of bamboo activated carbon. The nickel removal from electroplating industry wastewater by bamboo activated carbon was done in this study at various adsorbent dosages (0.5, 1.0, 1.5 and 2.0 g/L), agitation speeds (25, 50, 75 and 100 rpm), particle sizes (2.36, 1.18, 0.6 and 0.3 mm), and concentration dilutions (0, 25, 50, 75 and 100%). The maximum removal percentage of nickel from electroplating industry wastewater using bamboo activated carbon was found to be 98.7 % at an optimum adsorption dosage 1.5 g/L, agitation speed 25 rpm, particle size 0.6 mm and concentration dilution 75 % with 110 min. contact time and 5.5 pH. Functional groups available in a bamboo activated carbon before and after treatment were determined by fourier-transform infrared spectroscopy analysis. Fourier-transform infrared spectroscopy analysis specified that alkanes, carboxylic acids, esters, amides, amines, aromatic compounds, alkyl halides, ethers, alcohols, carboxylic acids, aldehydes functional groups in bamboo activated carbon was contributed for removing nickel from the electroplating industry wastewater. Isotherm models were used to know the adsorption behaviour of bamboo activated carbon for removing nickel from electroplating industry wastewater. Isotherm results revealed that Langmuir model was best suited with the equilibrium data than Freundlich model. Finally, this study concluded that bamboo activated carbon was best suited for removing nickel from electroplating industry wastewater.
D. Sivakumar
Abstract
The isolated fungi species of different kinds from chromium contaminated soil sites located in Nagalkeni, Chennai were used for reducing chromium(VI) in a tannery industry wastewater of Nagalkeni, Chennai. The experiments were conducted to know biosorption potential of isolated fungi species for ...
Read More
The isolated fungi species of different kinds from chromium contaminated soil sites located in Nagalkeni, Chennai were used for reducing chromium(VI) in a tannery industry wastewater of Nagalkeni, Chennai. The experiments were conducted to know biosorption potential of isolated fungi species for removing chromium(VI) in a tannery industry wastewater against the different pH, fungi biomass and chromium(VI) concentration (dilution ratio). The results of this study indicated that the order of maximum removal of chromium(VI) by an isolated fungi species at an optimum pH of 3, fungi biomass of 4g andan initial chromium(VI) concentration of 18.125 mg/L (dilution ratio 4)is A. niger > A. flavus > A. fumigatus > A. nidulans > A. heteromorphus > A. foetidus > A. viridinutans. This study found that the maximum removal of chromium(VI) was achieved by Aspergillus niger (96.3 %) than other fungi species at chromium(VI) concentration of 18.125 mg/Lin a tannery industry wastewater. The chromium removal from tannery industry wastewater was validated by checking chromium removal in an aqueous solution and by checking the removal efficiency of other parameters in a tannery industry wastewater using same isolated A. niger. Biosorption model was proposed to simulate the experimental condition for removing chromium(VI) in a tannery industry wastewater by all isolated fungi species. The R2 and values of the proposed model predicted that the proposed biosorption model is very much useful for predicting the trend of reduction potential of chromium(VI) in a tannery industry wastewater by all isolated fungi species. This study suggested that one could select the type of fungi species, ion concentration level, selection of treatment period, quantity of biomass to be used, and pH level of the medium, to achieve the highest reduction of any toxic metals from any contaminated water, wastewater and soil environment.
D. Sivakumar; J. Nouri
Abstract
This study was focused on removal of various parameters in paper mill effluent using a method called bioremediation by Azolla caroliniana. The experimental investigations have been carried out using Azolla caroliniana for conducting the sorption study with various dilution ratios (2, 4, 6, 8, and ...
Read More
This study was focused on removal of various parameters in paper mill effluent using a method called bioremediation by Azolla caroliniana. The experimental investigations have been carried out using Azolla caroliniana for conducting the sorption study with various dilution ratios (2, 4, 6, 8, and 10), pH (3, 4, 5, 6, 7, 8 and 9) and biomass (200, 400, 600, 800 and 1000 g). The maximum removal percentage of TDS, BOD and COD in a paper mill effluent was obtained at the optimum dilution ratio of 6, pH of 8 and biomass of 800 g. The results of this study indicated that the maximum removal percentage of TDS, BOD and COD in a paper mill effluent was 82.3 %, 88.6 % and 79.1 % respectively. Also, the study focused on uptake of TDS, BOD and COD in paper mill effluent by Azolla caroliniana through bioaccumulation factor and translocation factor. The results of bioaccumulation factor revealed that TDS, BOD and COD in paper mill effluent were adsorbed by Azolla caroliniana. The results of translocation factor revealed that the roots of Azolla caroliniana translocate the TDS, BOD and COD in a paper mill effluent to the shoots of Azolla caroliniana. From the results, this study concluded that bioremediation by Azolla caroliniana could be effectively used for removing TDS, BOD and COD in a paper mill effluent. This study also suggested that Azolla caroliniana may be used for removing various contaminants, not only from paper mill effluent, but also from any other industrial effluents.
D. Sivakumar
Abstract
Present study dealt the removal of Cr(VI) in a tannery industry wastewater using rice husk silica powder as an adsorbent.The experimental investigations have been carried out by using rice husk silica powder for different adsorption dosage, different contact time and different pH against the initial ...
Read More
Present study dealt the removal of Cr(VI) in a tannery industry wastewater using rice husk silica powder as an adsorbent.The experimental investigations have been carried out by using rice husk silica powder for different adsorption dosage, different contact time and different pH against the initial Cr(VI) concentration of 292 mg/L. The maximum percentage removal of Cr(VI) in the tannery industrial wastewater (88.3 %) was found at an optimum adsorbent dosage of 15 g, contact time of 150 min., and pH of 4. Further, the experimental data on removal of Cr(VI) from tannery industry wastewater was validated with the Cr(VI) aqueous solution of same initial concentration of tannery industry waster against the optimum process parameters. The results of the validation experiment showed that the experiments conducted for the removal of Cr(VI) in a tannery industry wastewater may be reproducing capability for analyzing various parameters along with Cr(VI) based water and industry wastewater. The experimental data were fitted to Langmuir and Freundlich isotherm models. Isotherm models result indicated that the equilibrium data fitted well with the Langmuir isotherm than Freundlich isotherm, because of higher correlation created between dependent and independent variables. Thus, the adsorption method using rice husk silica powder was used effectively for removing Cr(VI) in the tannery industrial wastewater, seems to be an economical and worthwhile alternative over other conventional methods, because of their abundant source, low price, multi-purposes and antimicrobial properties.
