D. Sivakumar; J. Nouri; T.M. Modhini; K. Deepalakshmi
Abstract
Water is prime requirement for surviving of any living beings. The existence of surface water and groundwater sources are used for domestic, agriculture and industrial purposes in all over the world. Fresh water from both the water sources is highly contaminated in recent years because of rapid ...
Read More
Water is prime requirement for surviving of any living beings. The existence of surface water and groundwater sources are used for domestic, agriculture and industrial purposes in all over the world. Fresh water from both the water sources is highly contaminated in recent years because of rapid population growth, modern agriculture and industrial growth. Among them, contamination of water sources due to industrialization is high and it requires more attention to protect those water sources. In this study, nickel removal from electroplating industry wastewater was done with the help of bamboo activated carbon. The nickel removal from electroplating industry wastewater by bamboo activated carbon was done in this study at various adsorbent dosages (0.5, 1.0, 1.5 and 2.0 g/L), agitation speeds (25, 50, 75 and 100 rpm), particle sizes (2.36, 1.18, 0.6 and 0.3 mm), and concentration dilutions (0, 25, 50, 75 and 100%). The maximum removal percentage of nickel from electroplating industry wastewater using bamboo activated carbon was found to be 98.7 % at an optimum adsorption dosage 1.5 g/L, agitation speed 25 rpm, particle size 0.6 mm and concentration dilution 75 % with 110 min. contact time and 5.5 pH. Functional groups available in a bamboo activated carbon before and after treatment were determined by fourier-transform infrared spectroscopy analysis. Fourier-transform infrared spectroscopy analysis specified that alkanes, carboxylic acids, esters, amides, amines, aromatic compounds, alkyl halides, ethers, alcohols, carboxylic acids, aldehydes functional groups in bamboo activated carbon was contributed for removing nickel from the electroplating industry wastewater. Isotherm models were used to know the adsorption behaviour of bamboo activated carbon for removing nickel from electroplating industry wastewater. Isotherm results revealed that Langmuir model was best suited with the equilibrium data than Freundlich model. Finally, this study concluded that bamboo activated carbon was best suited for removing nickel from electroplating industry wastewater.
D. Sivakumar; J. Nouri
Abstract
This study was focused on removal of various parameters in paper mill effluent using a method called bioremediation by Azolla caroliniana. The experimental investigations have been carried out using Azolla caroliniana for conducting the sorption study with various dilution ratios (2, 4, 6, 8, and ...
Read More
This study was focused on removal of various parameters in paper mill effluent using a method called bioremediation by Azolla caroliniana. The experimental investigations have been carried out using Azolla caroliniana for conducting the sorption study with various dilution ratios (2, 4, 6, 8, and 10), pH (3, 4, 5, 6, 7, 8 and 9) and biomass (200, 400, 600, 800 and 1000 g). The maximum removal percentage of TDS, BOD and COD in a paper mill effluent was obtained at the optimum dilution ratio of 6, pH of 8 and biomass of 800 g. The results of this study indicated that the maximum removal percentage of TDS, BOD and COD in a paper mill effluent was 82.3 %, 88.6 % and 79.1 % respectively. Also, the study focused on uptake of TDS, BOD and COD in paper mill effluent by Azolla caroliniana through bioaccumulation factor and translocation factor. The results of bioaccumulation factor revealed that TDS, BOD and COD in paper mill effluent were adsorbed by Azolla caroliniana. The results of translocation factor revealed that the roots of Azolla caroliniana translocate the TDS, BOD and COD in a paper mill effluent to the shoots of Azolla caroliniana. From the results, this study concluded that bioremediation by Azolla caroliniana could be effectively used for removing TDS, BOD and COD in a paper mill effluent. This study also suggested that Azolla caroliniana may be used for removing various contaminants, not only from paper mill effluent, but also from any other industrial effluents.